Hardwood Floors and Resale Value: What Sellers Can Expect

Yes, hardwood floors help a home sell, and the strongest return comes from the floors you already have. In the National Association of Realtors’ 2022 Remodeling Impact Report, refinishing existing hardwood ranked first among interior projects, recovering an estimated 147% of its cost at resale. If your St. Louis or Metro East home has hardwood under worn finish, a refinish before listing is likely the smartest flooring money you can spend. Before you tear anything out, we would rather you call us to see what your floors can still do.
TL;DR
NAR’s 2022 report estimated that refinishing hardwood recovers 147% of its cost at resale, and new wood flooring recovers 118%.
The same report put a refinish at about $3,400 in cost and about $5,000 recovered, against $5,500 and $6,500 for new wood floors.
Replacing hardwood runs two to three times the cost of refinishing, according to one listing agent writing for Inman.
Buyers react to the finish and condition of a floor more than to the species of wood, so scratches and dull spots are the first thing to fix.
Floors that are sound and thick enough can often be refinished in a day, with no dust cloud, before photos are taken.
Table of Contents
What hardwood does for a home’s resale value
Hardwood is one of the few finishes buyers actively look for. According to the National Wood Flooring Association, a survey of real estate agents concluded that homes with wood floors sell faster and for more money, with an increase of as much as 10 percent. Its example: a $200,000 home that invests $10,000 in hardwood could potentially sell for $220,000.
That is the high end of the range. Most published estimates are more modest, and it helps to read them as ranges rather than promises. The table below collects the figures that come from NAR and the realtor.com and Floor Covering News coverage of its report.
Project | Typical cost estimate | Estimated resale value recovered | Cost recovery |
Refinish existing hardwood | $3,400 | About $5,000 | 147% |
Install new wood flooring | $5,500 | About $6,500 | 118% |
Insulation upgrade | n/a | n/a | 100% |
Complete kitchen renovation | n/a | n/a | 75% |
The dollar figures come from realtor.com’s coverage of the NAR/NARI report, and the ranking, including insulation at 100% and a complete kitchen renovation at 75%, comes from NAR’s own news page. Floor Covering News reported the same study, comparing the 147% refinishing figure with 67% for a kitchen upgrade.
The takeaway is simple. A floor refinish costs a small fraction of a kitchen project, and in this survey it was estimated to give back more than it cost.

How to read those numbers
“Cost recovery” means the share of what you spent that the project is estimated to return when you sell. A 147% figure means $3,400 spent is estimated to be worth about $5,000 to a buyer. It is not a guarantee that your sale price will rise by that amount, and it is not profit on top of everything else.
Here is what sits behind the report. Per realtor.com, the 2022 NAR/NARI Remodeling Impact Report drew on surveys of about 6,200 combined responses, and its estimates assume an average 2,495-square-foot home built after 1981 with midrange materials. Your house will differ. A larger home, a bigger share of hardwood, or heavily worn floors will move your own numbers.
A practical way to use the figures: treat them as the reason to put hardwood near the top of your pre-listing list, then get a price for your actual square footage. That is where an in-home look beats any national average.
Buyers respond to condition, not just material
Hardwood by itself is not the selling point. Well-kept hardwood is. Opendoor’s home condition data report found that homes in better condition close at or above list price nearly 10% more often than comparable homes in worse condition, and sell more than 20% faster. It also found that 70% of the homes rated in good condition had real hardwood flooring.
That pattern fits what buyers say they want. NAR’s Jessica Lautz noted in the realtor.com piece that wood flooring looks beautiful in photos, feels more hygienic than carpet, and appeals to pet owners because it is easy to clean. Photos matter: most buyers meet your house on a screen first, and glossy, even floors read as a cared-for home.
A few things drag that impression down:
Dull, traffic-worn paths through the main living areas
A mix of finishes or sheens from room to room
Scratches that have gone through the finish to bare wood
Old wax buildup that leaves floors hazy or sticky
Water stains or boards that cup, which a buyer’s inspector may flag
Most of the first four are finish problems, not wood problems, and finish problems are fixable.
Refinish or replace: what the cost difference means for a seller
If your floors look tired, the real question is whether the wood is worth saving. Inman published a five-point hardwood checklist for listing agents in August 2026. Its author, listing agent Alex Veit, makes three points worth passing on:
Sellers usually fixate on the finish, not the wood. If a fingernail slides over a scratch, it is worn finish, which can be sanded or recoated away.
A tear-out and replace runs two to three times what refinishing costs once demolition, materials and labor are added, and it leaves the house on bare plywood for days.
Solid three-quarter-inch hardwood can take five to seven sandings over its life, so most older floors have plenty of life left.
Opendoor’s hardwood value guide puts refinishing at $3 to $5 per square foot, with a professional refinish typically running $1,000 to $2,500 for an average home. It puts new hardwood at $8 to $15 per square foot installed. It also notes that solid hardwood can generally be refinished if it is structurally sound and at least 3/4 inch thick.
Those are national ranges, not quotes, and prices in the St. Louis area depend on square footage, stairs, the condition of the floor and the finish you choose. The comparison still holds for almost any house: refinishing costs far less, takes far less time and, in the NAR survey, was estimated to recover more of its cost than new flooring.
If you want the longer cost argument, we cover it in why refinishing beats floor replacement cost. For a look at how the money works, see hardwood floor refinishing investment benefits explained.
Matching the service to the floor you have
Not every floor needs the same work before listing. Choosing the lightest service that gets the floors photo-ready keeps your costs down and your timeline short. These are the options we offer, from lightest to most complete.

Clean and buff
For floors that are dingy but not scratched through, a deep hardwood floor clean and buff brings back the shine. It suits floors that have been looked after but have lost their luster from daily wear.
Screen and recoat
A screen and recoat scuffs the old finish and rolls on a fresh coat. Inman’s listing agent describes it as costing a fraction of a full refinish and photographing well for listings. Our screen and recoat service fits floors with surface wear where the finish has not worn through to bare wood.
Wax removal
Older floors in established neighborhoods are often hazy from years of wax. Our wax removal service strips that buildup so the floor can take a fresh finish and look even again.
Full sand, stain and refinish
When scratches go deep, the color is dated, or the finish has worn to bare wood, a full sand, stain and refinish gives you a new floor from the one you have. It is also the way to unify the color across rooms, which matters because a continuous look reads as a larger, more finished main level. Light, natural oak tones are especially popular in 2026, according to broker associate Matt Brown in Martha Stewart’s flooring feature, because they feel bright and make rooms look larger.
Not sure which one you need? Our guide to signs your hardwood floors need refinishing walks through what to look for, and the hardwood floor inspection guide explains what we check before any work begins.
Water damage and structural problems come first
Refinishing improves appearance. It does not fix moisture. Deep gouges, warped boards and buckling can point to water damage or a subfloor problem, and a buyer’s inspection can turn those into repair requests or price negotiations. If you see cupping, soft spots or staining that looks like it came from a leak, have the source found and repaired before any finish work. In that case, start with a plumber, a roofer or a licensed home inspector, depending on where the water came from.
Once the floor is dry and sound, finish work is straightforward. It also helps to know how old your floors are, since age affects how many more sandings remain: see how wood floor age affects refinishing results.
Hardwood in the St. Louis and Metro East market
How much a floor adds depends on what comparable homes near you offer. A house in Ladue or Clayton competes with listings where buyers expect well-kept wood floors, while a starter home in Granite City or Troy competes on condition and move-in readiness. In every one of those markets, a scuffed, hazy floor is an easy thing for a buyer to count against you and an easy thing for you to fix.
Two habits help:
Compare before you spend. Ask your listing agent to show you current competing listings in your neighborhood and how their floors photograph. That tells you whether you need a light refresh or a full refinish.
Do the floors before the photographer comes. Finish work shot before photos means your listing images show the floors at their best from day one. Plan it ahead of listing, and keep furniture moves and drying time in mind.
If you are replacing carpet or considering laminate, laminate vs. hardwood refinishing lays out what each costs and which fits. And if you are wondering why hardwood holds up so well compared with alternatives, read why hardwood outlasts other flooring types. According to the National Wood Flooring Association, properly maintained wood floors can last over 100 years and be sanded and refinished numerous times.
A simple pre-listing plan
Here is the order we suggest to sellers.
Fix moisture or structural problems first. Nothing cosmetic overcomes them.
Walk the floors with the fingernail test. If a nail glides over scratches, the finish is the issue, and a recoat or refinish will handle it.
Choose the lightest service that solves the problem. Clean and buff for dull floors, screen and recoat for surface wear, full sand and refinish for deep wear or dated color.
Schedule it before listing photos. Keep the work ahead of your list date so there is room for furniture to go back.
Keep the floors looking new through showings. Simple care habits protect the result; our guide to maintaining refinished hardwood floors long term covers them.
We have been restoring hardwood floors in central Illinois and the St. Louis metro area since 2003, and our advice to sellers has not changed: before you reflor it, let us restore it. A floor you already own has the right wood, the right fit and, usually, plenty of life left in it. What makes that practical for a seller is time and mess. Most of our restoration services are completed in a single day, with floors ready to walk on in about three hours. We use dustless techniques and eco-friendly products on every job, so you are not living in a cloud of sawdust or airing out fumes while you prepare to show your home. The numbers back the instinct. NAR’s report ranked refinishing ahead of replacing, and a restored floor lets buyers see real hardwood in good condition, which is what they are looking for. That is why we start every conversation with what your floor can still do. Kim
Our view: restore before you replace
Let us look at your floors first
If you are listing soon, the fastest way to know what your floors need is to have someone look at them. We offer an in-home consultation so you can see what service fits before you commit to anything. We serve homeowners across St. Louis, Monroe and Madison Counties, including Columbia, Belleville, Fairview Heights, Waterloo, O’Fallon and the surrounding communities.

More than 450 Google reviews from local homeowners say we do what we promise. When you are ready, start with the in-home consultation and tell us your list date.
FAQ
Do hardwood floors increase home value?
Yes. NAR’s 2022 Remodeling Impact Report estimated 118% cost recovery for new wood flooring and 147% for refinishing existing hardwood. Industry surveys also suggest homes with hardwood tend to sell faster. How much your home gains depends on your floors’ condition, your neighborhood and the comparable listings around you.
Is it better to refinish hardwood floors or replace them before selling?
If your floors are solid and thick enough to sand, refinishing is usually the better move. It costs a fraction of replacement, and NAR’s report ranked it first among interior projects for estimated cost recovery. It also takes days less than a tear-out and install. A walkthrough of your floors will show whether they qualify.
How long before listing should I refinish my floors?
Aim to finish the work before your listing photos are taken. Most of our restoration services are completed in a single day, with floors ready to walk on in about three hours, so scheduling is flexible. Allow time to move furniture back and to repair any moisture issue first.
Do scratches hurt resale value?
Light surface scratches on a sound floor are cosmetic and usually come out with a recoat or refinish. Deep gouges, warped boards or buckling are different: they can signal water damage and prompt inspection issues. Have a pro assess any floor with those signs before you list.
Sources
Invest in Your Home with Wood Floors, National Wood Flooring Association
The Surprising, Most Profitable Improvement Homeowners Can Make, realtor.com
Why Remodeling Homeowners Need a Real Estate Agent’s Guidance, NAR
NAR: Hardwood projects provide highest ROI, Floor Covering News
A Five-Point Hardwood Checklist for Real Estate Listing Agents, Inman
5 Flooring Styles That Will Boost Your Home Value, Martha Stewart
Recommended





Comments